Quality Tools Insights
How To Drill Into Brick Without Cracking It
Although bricks are pretty robust building material, drilling into them is not as difficult as you might think. Drilling into masonry without cracking does not require the expertise of a professional handyman. With the right drill and drill bit, it just takes a few minutes to make a hole.
- 1 comment
- Tags: Brick Drilling, Construction Tools, DIY, Drills, HOW TO, Masonry Drills, RUKO, Step by Step Guide/Demonstration, TERRAX
How To Use A Step Drill Bit On Metal: Tools And Techniques
Drilling multiple-sized holes in sheet metal has become much easier with the step drill. A stepped drill bit is a conical-shaped bit with gradually increasing diameters. A sharp groove on one side of the tool serves as a cutting edge and has several levels or steps with increasing diameters from tip to end.
- 2 comments
- Tags: Aluminium Drilling, Construction Tools, DIY, Drills, HOW TO, RUKO, Steel Drilling, Step by Step Guide/Demonstration, Step Drills, TERRAX
How To Use A Countersink Drill Bit For Metal: Pro Tips For Effective And Safe Use
It is not uncommon to find screw heads that have been incorrectly placed, causing them to stick out from the surface. Not only is this unsightly, but the protruding screw heads can also be dangerous, as it can result in a severe cut or scratches. Additionally, if these screws can't be tightened all the way, items may get caught on the head of the screw. Countersinking your hole before inserting the screw is one way to avoid this problem in the future.
- 0 comments
- Tags: Aluminium Drilling, Construction Tools, Countersinking, Countersinks, DIY, HOW TO, RUKO, Steel Drilling, Step by Step Guide/Demonstration, TERRAX, Titanium Drilling
How to Choose What Size Drill Bit To Use
Drilling is a must-have skill for both DIY home improvement and large-scale tasks. Therefore, it’s important that you choose the right size bill bit for each drilling task.
- 0 comments
- Tags: Aluminium Drilling, Brick Drilling, Concrete Drilling, Construction Tools, Countersinking, DIY, Drills, HOW TO, Jobber Drills, Masonry Drills, Plastic Drilling, RUKO, Special Drills, Steel Drilling, Step by Step Guide/Demonstration, Step Drills, TERRAX, Titanium Drilling, Twist Drills, Wood Drilling, Wood Drills
A-Z guide for Drilling Aluminium
Aluminium is a low-density and non-ferrous metal that is resistant to corrosion. It is also soft and ductile, which means some challenges involved when drilling aluminium. This is because its unique characteristics can cause it to have more constant and prolonged contact with the cutting tip, causing heat to build up.
- 2 comments
- Tags: Aluminium Drilling, Annular Cutters, Broach Cutters, Core Drills, DIY, Drills, Hole Saw, Jobber Drills, RUKO, Step by Step Guide/Demonstration, Step Drills, TERRAX, Twist Drills
