Quality Tools Insights — Step by Step Guide/Demonstration

Countersink A Countersunk Screw

A flush flat surface can create a nice affect within your material/workpiece. To keep the screw heads or nuts flush requires a process called Countersinking.

0 comments
Tags: Countersinking, Countersinks, De Burring Tools, DIY, Drills, HOW TO, RUKO, Steel Drilling, Step by Step Guide/Demonstration, TERRAX

What are Hole Saws? How do you use a Hole Saw? Which materials can they handle? When should you use a Hole Saw Cutter? The ultimate guide on Hole Saw Tools for your DIY small scale jobs or big scale construction Projects.

How To Drill Into Brick Without Cracking It

Although bricks are pretty robust building material, drilling into them is not as difficult as you might think. Drilling into masonry without cracking does not require the expertise of a professional handyman. With the right drill and drill bit, it just takes a few minutes to make a hole.

1 comment
Tags: Brick Drilling, Construction Tools, DIY, Drills, HOW TO, Masonry Drills, RUKO, Step by Step Guide/Demonstration, TERRAX

How To Use A Step Drill Bit On Metal: Tools And Techniques

Drilling multiple-sized holes in sheet metal has become much easier with the step drill. A stepped drill bit is a conical-shaped bit with gradually increasing diameters. A sharp groove on one side of the tool serves as a cutting edge and has several levels or steps with increasing diameters from tip to end.

2 comments
Tags: Aluminium Drilling, Construction Tools, DIY, Drills, HOW TO, RUKO, Steel Drilling, Step by Step Guide/Demonstration, Step Drills, TERRAX

How To Use A Countersink Drill Bit For Metal: Pro Tips For Effective And Safe Use

It is not uncommon to find screw heads that have been incorrectly placed, causing them to stick out from the surface. Not only is this unsightly, but the protruding screw heads can also be dangerous, as it can result in a severe cut or scratches. Additionally, if these screws can't be tightened all the way, items may get caught on the head of the screw. Countersinking your hole before inserting the screw is one way to avoid this problem in the future.